Defra Approved Back Boiler Stoves
There are a myriad of things to think about when selecting a new stove. The appeal of dual function is just one of the many aspects to take into consideration.
DEFRA approved back boiler stoves provide the ideal solution to these problems. They produce only a tiny amount of smoke because they require the smallest amount combustion air.
Fireplaces And Stove -approved back boiler is a great choice to get a clean burning stove that can warm your home and provide hot water to your radiators. The stoves come with an integrated steel boiler that can be used for heating your central heating system whilst the fire burns within the stove, meaning it's a far more efficient method of using a wood burner.
The majority of our defra-approved back boiler stoves come with an airwash system that is pre heated that keeps the glass doors free of soot and ash. The secondary combustion system burns any unburnt particles created during the initial combustion. This keeps the flue gas clean which results in an efficient burn and lower fuel costs, which can save you money on your energy bills.
Some of our stoves are even cleaner than this and have been independently tested to meet the latest stricter DEFRA emissions standards to be Defra SE (Smoke Exempt) approved. The stoves do this by having a top air vent adjustment that stops you from closing it all the way that would shut off oxygen supply to the flame. This causes the fire to smoulder instead of burning efficiently and release more pollutants into the air.
The moisture content of the fuel can be a significant factor in the amount of smoke that comes out of a stove. We recommend burning only seasoned, dried wood with a minimum moisture content of 20 percent to ensure that your stove burns as efficiently and cleanly as is possible. The majority of our Defra approved stoves have a built in moisture sensor that will adjust the rate of combustion accordingly when using damp or wet wood.
Some manufacturers have gone a step further to boost efficiency by adding a secondary clean burn system. This is controlled by a chrome lever at the lower part of the stove. It opens and closes an air vent that draws the air over the fire, while reburning smoke produced from the initial process of burning. Our Defra SE approved ranges are now even more efficient. You can save money on your energy bills.
Easy to Clean
A back boiler stove that is defra-approved allows you to run your central heating as well as hot water from the same system. This is done by making a loop that connects the other taps on the back boiler (there are usually two) and your hot water tank. You can then use thermosyphoning in order to get heat into the home. This means that your boiler will never run out of hot water, as it will be supplied by the tank.
Clean your stove frequently to ensure that it is operating at its peak. To begin, make sure the stove is cool. Clean the body and doors of the stove with a clean, dry cloth. We suggest using a microfiber cloth since they are much less rough than cotton ones.
It is a good idea, after wiping down the interior of your stove to clean the glass. Glass cleaners can be found in a variety of hardware stores and can help remove stubborn marks and stains. It is recommended to use the glass cleaner sparingly because too much could harm the surface of the glass.
Over time the seals around the doors of your stove and the glass can begin to deteriorate. It is important to replace the seals every year to prevent gaps that could let heat escape. This can be done using stove rope, which is available in a majority of hardware stores.
If you own a defra-approved stove with an Eco Design 2022 compliant back boiler and the combustion process is much more efficient than traditional wood burning stoves. The most recent technologies have made it possible to reduce the amount of combustibles that are released into the air. Stoves that are compliant are more environment sustainable and also more affordable to run.
Another thing to remember with a back boiler stove is that it is always a bit more expensive than a normal multi fuel stove, as it will generate more hot water than a normal multifuel stove. But, it's an extremely cost-effective way to heat your home, as you can power both central heating and hot water from the same system.
Easy to Install
Boiler stoves are able to provide heat to the room and hot water to your central heating system, making them a stylish work horse that is an efficient and cost-effective solution. A wood burner with a back boiler is different from other multi-fuel stoves, which must be connected to the gas boiler. It is able to connect directly to hot water and central heating of your home, removing the need for a separate heating system.
A wood-burning stove with a back boiler can also be used to provide power to your heating system completely by renewable sources, making them a more environmentally conscious choice over other stoves. They also produce fewer emissions because they burn logs or pellets, than oil or gas heating systems, making them a great option for those concerned about global warming.
Installing a wood-burning fireplace with a boiler is fairly simple. It is crucial to ensure that the stove is correctly installed and linked to your heating system, so it's best to have this carried out by a qualified heating engineer. They can help you make sure that your stove is fitted correctly and is connected to the right systems, as well as making sure that all the safety devices are in place.
Defra Approved Stoves, or Defra exempt stoves as they are referred to they have met the Department of Environment, Food and Rural Affairs' (DEFRA) requirements for smoke emission levels. They are allowed to be used in Smoke Control Areas and have been tested and modified to have a clean and efficient combustion that is able to be utilized with wood and smokeless fuels.
As such, DEFRA approved stoves, such as the Defra Exempt Dunsley Yorkshire and our best selling Hi-Flame Aidan are able to offer a highly efficient burn with very low harmful emissions. They have been tested according to the latest Eco Design regulations, which limit the amount of particulate matter as well as NOx, CO2 and organic gases that the stove will produce during its normal operation.
Suitable for Smoke Control Areas
The majority of UK cities and towns are classified as Smoke Control Areas and burning logs on older stoves or open fires can result in a fine for creating nuisance smoke emissions. The good news is that Defra approved back boiler stoves are exempt from these restrictions if you select the correct appliance for your home.
Wood burners that are exempt from Defra have been designed with Clean Burn technology, which ensures that fuel is burned efficiently and produces little smoke. This means that you can enjoy a beautiful fireplace living in a smoke-free area however, you'll need to limit your logs to approved mineral fuels that are smoke-free.
The stoves are compliant with Defra standards because they have airtight chambers with precisely controlled airflow. They also employ triple airflow systems that ensure that combustion byproducts will be burned up before they escape the chimney. This helps not only keep any unwanted smoke out, but also helps to reduce the accumulation of soot, which can block the flue and reduce gas efficiency.
It is crucial to purchase your Defra approved stove from an expert local Retailer who will ensure that the appropriate size stove is chosen for your home to ensure maximum heating efficiency and that it is installed correctly by a HETAS registered installer. They can also assist you in choosing the best chimney liner to ensure a safe and efficient installation, and help you decide if your home needs any additional ventilation.
Modern DEFRA approved stoves are superior to traditional wood burners or open fires. They provide a minimum 75% efficiency, which will not only lower your carbon footprint but also helps you save money. Defra approved back boiler stoves can be used in smoke-controlled areas and will require at least 6mm of stainless steel twin-wall flexible chimney liner. This is cheaper than the larger 12mm liners required for Ecodesign stoves.
If you have any doubts regarding whether your property is in a smoke-control zone you can ask your local council. They'll be able to provide you with the latest information. The majority of reputable stove manufacturers have a Defra-exempt classification in their range to help you to recognize these appliances.